Motorola DROID User Manual page 40

Note: To extend battery life, turn Bluetooth power off
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, see "Reconnect devices" on page 38.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
> Settings > Wireless &
2 Touch Menu
networks > Bluetooth settings.
Touch Bluetooth to turn on and scan. If Bluetooth
3
power is already on, touch Scan for devices.
4 Touch a device to connect.
If necessary, touch OK, or enter the device passkey
5
(like 0000) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
38 Bluetooth® wireless
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.
To manually reconnect your phone with a paired
device, touch the device name in the Bluetooth
devices list.
Disconnect devices
To automatically disconnect your phone from a paired
device, simply turn off the device.
To manually disconnect your phone from a paired
device, touch the device name in the devices list, then
> Disconnect.
touch Menu
Edit properties
To edit the device name, touch Menu
> Wireless & networks > Bluetooth settings
> Device name. Enter a name and touch OK.
> Settings