Listening To The Fm Radio - Sanyo DMP-M600 Instruction Manual

Listening to the FM radio

Important note:
When listening to the radio, you must connect the
headphones. The headphones serve as an FM aerial.
First, select "FM" function (refer to page 13).
103.25 MHz
- If a radio frequency is not displayed;
press [a], then move [a] right or left to select "LISTEN
FM" and press [a].
Automatic/Manual tuning
Automatic tuning
Move [a] right or left for at least 1 second.
105.15 MHz MANUAL
The automatic station scanning mode is set. The nearest
station will be automatically scanned and scanning will be
stopped.
Manual tuning
In the automatic tuning, move [a] right or left. The manual
tuning mode is set. Move [a] right or left briefly until the
desired frequency is displayed.
- Press [MODE]. The preset tuning mode returns.
User preset tuning
To preset stations
Up to 24 FM stations can be preset.
1. Tune in the station to be preset (refer to "Automatic/
Manual tuning").
2. Press [a]. "PRESET" appears.
3. Press [a] again within 5 seconds. The preset tuning
mode is set and the first of an empty preset number is
blinking.
Note:
Move [a] right or left to select the desired preset
number if required.
4. Press [a] within 10 seconds to preset the station.
- In this example, "103.25 MHz" is preset on the
preset number 12.
5. Repeat steps above to add more stations.
Setting up the FM mode (refer to page 21)
Setting up the preset stations (refer to page 21)
P01
PRESET ModE
103.25 MHz P12
103.25 MHz P12
Listening to preset stations
Move [a] right or left to select the preset number.
Recording FM radio
1. Tune in the station to be recorded.
2. Press [a], then move [a] right or left to select "REC
FM".
3. Press [a]. Recording begins.
"HQ" recording mode is automatically selected.
To stop recording
Press [a].
-18-
REM 6 28 46 16-16
H M S