Before Operation - Sanyo DMP-M600 Instruction Manual

Before operation

Using the headphones
Connect the headphones to the
Turning the power on and off
POWER
Press [a POWER]. "HELLO!" appears briefly on the display
and the power turns on.
The last selected status appears (Resume function).
Example:
Sweet
Press [a POWER] (for at least 2 seconds). "SEE YOU!"
appears and the power turns off.
Auto power off function
Leaving the player on for 15 minutes without using it
automatically turns off the power. (except during an FM
broadcast reception)
Battery indicator
" " indicates that the battery is full and the power in
battery will be come less when using.
" " indicates low battery power and the battery should be
charged.
Hold function
This prevents operation from stopping by accidentally
pressing a button.
Set [b HOLD] to the left. "HOLD ON" appears briefly and
the hold function is engaged.
b HOLD
- If an operation button is pressed while the hold function
is engaged, "HOLD ON" will appear and nothing else
happens.
Set [b HOLD] to the right. "HOLD OFF" appears briefly
and the hold function is disengaged.
Setting up the beep sound (refer to page 21)
Adjusting the contrast of LCD display (refer to page 21)
Setting up the backlight colour (refer to page 21)
Setting up the backlight time (refer to page 21)
Selecting the language (refer to page 21)
socket.
1-23
HOLD ON
-13-
Selecting the function
1. In the stop mode, press [MODE] (for at least 2 seconds).
The first stage menu appears.
MODE
2. Press [a], then move [a] right (e) or left (f) to
select the desired function ("
press [a] again.
Example:
: Music function
Sweet
: FM function
: Voice function
REM 6
To adjust the volume
Press [VOL] + or –. The volume level appears.
VOL
Function
", " " or "
1-23
103.25 MHz P01
29 48 1-23
H M S
VOLUME 16
(VOLUME 0 to 20)
") and