uuIndicatorsu
Indicator
Name
System Message
Indicator
IMA System
Indicator
Auto Idle Stop
Indicator
Turn Signal and
Hazard Warning
Indicators
74
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on along with a beep when
●
a problem is detected. A system
message on the i-MID appears at
the same time.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on if there is a problem
●
with the IMA system.
Blinks when Auto Idle Stop is in
●
operation. The engine
automatically shuts off.
Blink when you operate the turn
●
signal lever.
Blink when you press the hazard
●
warning button.
Explanation
While the indicator is on, press the
●
(display/information) button to see the
message again.
Refer to the Indicators information in this
●
chapter when a system message appears
on the i-MID. Take the appropriate action
for the message.
The i-MID does not return to the normal
●
screen unless the warning is canceled, or
the
button is pressed.
Remains on or does not come on at all
●
- Avoid high speed driving and have your
vehicle checked by a dealer as soon as
possible.
2 If the IMA Indicator Comes On P. 352
2 Auto Idle Stop P. 246
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown. Change
the bulb immediately.
2 Replacing Light Bulbs P. 302, 303
Message
—
—
—