Steering Wheel Controls - Acura 2000 TL Owner's Manual

Main Menu Table of Contents

Steering Wheel Controls

3. Press and release the SET/decel
button on the steering wheel. The
CRUISE CONTROL light on the
instrument panel comes on to
show the system is now activated.
Instruments and Controls
The cruise control may not hold the
set speed when you are going up and
RESUME/
down hills. If your speed increases
accel
going down a hill, use the brakes to
slow down to the desired speed. This
will cancel the cruise control. To
resume the set speed, press the
RESUME/accel button. The
CRUISE CONTROL light on the
instrument panel comes on.
When climbing a steep hill, the
automatic transmission may
downshift to hold the set speed.
Changing the Set Speed
You can increase the set cruising
speed in any of these ways:
•
Press and hold the RESUME/
accel button. The car will acceler-
ate. When you reach the desired
cruising speed, release the button.
•
To increase your speed in very
small amounts, tap the RESUME/
accel button repeatedly. Each time
you do this, your car will speed up
about 1 mph (1.6 km/h).
•
Push on the accelerator pedal. Ac-
celerate to the desired cruising
speed and press the SET/decel
button.