Wiper Blades - Acura 2000 TL Owner's Manual

Main Menu
Table of Contents
Check the condition of the wiper
blades at least every six months.
Look for signs of cracking in the
rubber, or areas that are getting
hard. Replace the blades if you find
these signs, or they leave streaks
and unwiped areas when used.
WIPER ARMS
To replace the blade:
1. Turn the ignition ON (II), switch
the wipers to INT or — low
position), then turn the ignition
OFF when the wiper arm is
approximately midway in its travel.
2. Raise the wiper arm off the
windshield.

Wiper Blades

3. Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold it in while you
push the blade assembly toward
the base of the arm.
Maintenance
LOCK TAB
CONTINUED