Acura 2000 TL Owner's Manual page 213

Main Menu
Table of Contents
Cooling System
6. Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7 Ibf-ft(10N-m,1.0kgf-m)
7. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
1.48 US gal (5.6 i, 1.23 Imp gal)
Maintenance
8. Pour coolant into the radiator up
to the base of the filler neck. Start
the engine and let it run for about
30 seconds. Then turn off the
engine. Pour coolant into the
radiator up to the base of the filler
neck.
9. Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
10.Install the radiator cap, and
tighten it to the first stop.