Color Information Display; Driving Position Memory System (Dpms); Reverse Tilt Door Mirrors - Acura RDX 2014 Advanced Technology Manual

C O L O R I N F O R M A T I O N D I S P L A Y
Choose what to display in the upper screen.
C h a n g i n g t h e D i s p l a y
D i s p l a y O p t i o n s
Audio/Phone
Show current audio
or phone call
information.
Clock
(or wallpaper)
Show the clock or
an imported
image.*
Minimum
Show a blank
screen with the
clock.
*See your Owner's Manual for instructions on how to upload a wallpaper
image.
10
Press DISPLAY. Rotate the
selector knob to choose and
enter your selection.
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
Store up to two driver's seat and mirror positions into memory for each corresponding
remote transmitter (1 or 2).
P r o g r a m m i n g t h e D P M S
1. Turn the vehicle on. Shift into
Park (P).
2. Adjust the seat and outside
mirrors to your preferred positions.
Notes:
• Once set, stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
• Lumbar positions cannot be stored.
R E V E R S E T I L T D O O R M I R R O R S
When you shift into Reverse (R), either door mirror can be tilted downward to improve
your view as you parallel park. Shifting out of Reverse returns the tilted mirror to its
original position.
H o w I t W o r k s
• To tilt the driver's door
mirror, push the mirror
selector switch to the left
(L) position when in
Reverse.
• To tilt the passenger's
door mirror, push the
mirror selector switch to
the right (R) position
when in Reverse.
• To turn the feature off,
push the switch to the
middle position.
3. Press SET. You will hear a beep.
4. Within 5 seconds, press the
memory button corresponding
to the remote (1 or 2) you are
using. You will hear two beeps.
11
9