Using The Osd - Dell 2707WFP User Manual

F The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
Power button
(with power light
indicator)

Using the OSD

Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes
are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for PC (Analog (VGA), Digital (DVI-D)) Input
Or
Main Menu for Non PC (Analog (VGA), Digital (DVI-D)) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a
complete list of all the options available for the monitor.
3. Push the MENU button once to activate the highlighted option.
4. Push and button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon Menu and Submenus
EXIT
BRIGHTNESS
CONTRAST
and buttons, according to the indicators on the menu, to make your changes.
Description
Select to exit the main menu.
This menu is to activate Brightness/Contrast adjustment.