Advertisement
Quick Links
Addonics
T E C H N O L O G I E S
Model: NAS25HDU2
User Manual
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
mini NAS
1.0
Key Features
•
Convert any 2.5" SATA drive into a Network Attached Storage device
•
Connect a USB printer to share it over the network
•
One Fast Ethernet 10/100Mbps port
•
Can be set as a DHCP server or client depending on whether a DHCP
server is present
•
Support Samba server, by which the server hosts 64 clients on line
•
Support FTP server allowing up to 8 FTP users at the same time
•
Built-in Bit torrent client to download files directly off the internet onto
the mini NAS
•
UPnP AV server can be used to share photo/music files stored on the
file server with XBOX 360 video game consoles connected to the LAN
•
User Management capability to allow read only or read/write access to
folders
•
Administrative management access via web browser with password
security.
•
Compatible with Windows 2000/XP/Vista, Mac 10.5.4 and above, and
Linux 2.6.x and above
The mini NAS is a flexible, economical and powerful unit for your network. Follow
the instructions to help you connect, setup, and configure it.
Note:
Any 2.5" SATA drive that you connect to the mini NAS will initially
be required to be formatted. This means, if you are connecting a
2.5" SATA drive with data on it, the hard drive will be formatted
erasing all the information. It is recommended that a backup of this
drive be made first.
If you have a 2.5" SATA drive that is currently formatted as FAT32,
it can be connected to the mini NAS without formatting. All files
that need to be shared on the network must be placed under the
Public folder.
Advertisement
Related Manuals for Addonics Technologies NAS25HDU2
Summary of Contents for Addonics Technologies NAS25HDU2
- Page 1 NAS Administrative management access via web browser with password security. • Model: NAS25HDU2 Compatible with Windows 2000/XP/Vista, Mac 10.5.4 and above, and Linux 2.6.x and above The mini NAS is a flexible, economical and powerful unit for your network. Follow the instructions to help you connect, setup, and configure it.
- Page 2 Network Environment Mini NAS connected directly to a computer’s NIC card If you connect the mini NAS to a computer directly, the will act as a DHCP There are 3 different setup conditions you can choose: server, assigning itself an IP address automatically and will also assign an IP address to the computer’s network card.
- Page 3 Status Date/ Time Setting Provide the basic information for Mini NAS. You can change time setting from this page. Clicks “Apply” to save the setting. By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead.
- Page 4 Factory defaults: If you experience problems after a firmware update, it is recommended to reset all settings. Disk Utility Note: Resetting the device will remove all folder from the sharing list, erase In this page, you can manage hard disk settings of the USB storage device. the FTP accounts, and reset all other settings! Please do not power off or disconnect Mini NAS connection during the firmware update process.
- Page 5 How to create a user Click on the “Add” button and type new account name and password. Click To access the PUBLIC folder of the Samba Server “OK”. The NAS will also create a SAMBA folder named “User1”. Click on the Windows icon located on the bottom left corner of the screen, on the “Search programs and files”...
- Page 6 Now you have set up the folder that you wish to share on your NAS . This Select an account you wish to delete. Click “Delete” to proceed. Please folder can be access from other computer on your local network. note that all the data inside the folder will be lost after the delete.
- Page 7 How to delete a FTP account In the “Account List”, you can see an overview of the existing account and status. You can change them at any time by selecting the account and modifying, disabling or deleting it. Note: Deleting a folder will erase all the files on the hard drive that are stored inside that folder.
- Page 8 Inside the share folder, you can access your picture or music files, depending on Same procedure applies for the Music and Video folders. which mode you are currently using. Select the files you would like to see or to listen, and start playback. On your Xbox 360, go to “Media”...
- Page 9 Install printer driver, (for example. if Epson PL-6200L Printer is connected to Select “Create a new port type of port:” then choose “Standard TCP/IP Port” the Mini NAS, you must install PL-6200L driver into the computer first.) After then click “Next” to continue. driver installation, click “Start”...
- Page 10 Select “Custom” and go to “Setting”. 8. Click “Finish” to complete TCP/IP printer setup. Note: The Mini NAS printer server does not support GDI/Host-based printers. For some Multi Function Printers (MFP); scanning functions might not be functional probably. Please contact Printer Manufacture for detail Specifications.
- Page 11 Click “Browse” and select torrent file then click “Upload” The file will Mac installations (Mac 10.5.4 or above) show up to the download queue. Open the Mac browser “Safari” and key-in the host name of the Mini NAS (for example, “Storage-0000”). It will detect the Mini NAS automatically. Note: Jobs listed in the Download Queue will be removed when Mini NAS is turned off or USB storage is removed.
- Page 12 Click on the Storage-xxxx (or the correct name of the Mini NAS). How to Map your Mini NAS to your system. Showing NAS Disk Drive in network Press “Start” button on Windows desktop Press “Search” Select Folders Select Computer or people Select a computer on the network and a new window will appear.
-
Page 13: Technical Support
OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information about your problem so that we can recreate and diagnose it. FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www.addonics.com...