Security
Set Service Tag
Set Supervisor Password
Set HDD Password
Password Bypass
Computrace
Boot
Boot Priority Order
Hard Disk Drives
USB Storage Device
CD/DVD ROM Drives
Network
Exit
This section allows you to save, discard, and load default settings before exiting from
System Setup.
This field displays your system's service
tag. If the service tag is not already set,
this field can be used to enter it.
Allows you to change or delete the
administrator password.
Allows you to set a password on the
computer's internal hard drive (HDD).
Allows you to bypass the system
password and the internal HDD password
prompts during a system restart/resume
from hibernate state.
Enable or disable the Computrace feature
on your computer.
Specifies the order of different devices in
which the computer will boot through at
start up.
Specifies which hard drive the computer
can boot through.
Specifies which USB storage device the
computer can boot through.
Specifies which CD/DVD the computer can
boot through.
Specifies which network device the
computer can boot through.
71