Figure 5-14: Configure Wireless Security Settings - Wep (64-Bit) Screen; Figure 5-15: Warning About Disabled Wireless Security Screen - Linksys WRT54G3G-ST User Manual

Wireless-G Router for Mobile Broadband
WEP (64-Bit)
Enter a passphrase or WEP key.
Passphrase - Enter a passphrase, and then click the Generate button, so a WEP key is automatically
generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It
must match the passphrase of your other wireless network devices and is compatible with Linksys wireless
products only. (For any non-Linksys wireless products, enter the WEP key manually on those products.)
Key 1 - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption,
enter exactly 10 hexadecimal characters. Valid hexadecimal characters are "0" to "9" and "A" to "F".
Click the Next button.
12. If you do not use any wireless security method, you will see a warning message. Linksys strongly
recommends that you enable wireless security on your wireless network. Otherwise, unauthorized users may
be able to access the Internet using your service and incur additional charges. You are liable for any and all
additional charges from your service provider. Click the Exit button. Proceed to step 13.
Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service
Using the Setup Wizard
Figure 5-14: Configure Wireless Security Settings - WEP
(64-Bit) Screen
Figure 5-15: Warning about Disabled Wireless Security
Screen
25