Page 1
Windows 2000 or XP machine. Requirements: F1DP116G This guide assumes that you are an Administrator or Owner of an SMB Cat 5 KVM-Over-IP (F1DP108G or F1DP116G) and have access to the KVM and its connected Hardware. • SMB Cat 5 KVM-Over-IP Unit •...
Page 2
Windows 2000 Set ‘Pointer Speed’ to half-way and make Set ‘Speed’ to slow and ensure that the sure that acceleration is turned off. acceleration is set to ‘None’. TSG-UK-2-002 TSG-UK-1-001 www.belkin.com www.belkin.com Page 2 of 4 Page 1 of 1...
Page 3
The ‘USB’ box on the bottom-left corner should only be ticked if the Host Machine (Server) is attached to the KVM via a USB Server Interface Module (SIM). TSG-UK-2-002 TSG-UK-1-001 www.belkin.com www.belkin.com Page 3 of 4 Page 1 of 1...
Page 4
Next, press the key combination LEFT CTRL + M to align the mouse. Once complete, check that the local and remote mice are now synchronised. Repeat these steps for all affected Host Server Ports. TSG-UK-2-002 TSG-UK-1-001 www.belkin.com www.belkin.com Page 4 of 4 Page 1 of 1...