Fiber-Optic Cables And Connectors - Cisco uBR7100 Series Hardware Installation Manual

Fiber-Optic Cables and Connectors

Fiber-Optic Cables and Connectors
Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Statement 1056
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Use a single-mode or multimode fiber-optic interface cable to connect your Cisco uBR7100 series router
to another router or switch. In general, multimode cables are gray or orange, and single-mode cables are
yellow. For SONET or synchronous digital hierarchy (SDH) single-mode and multimode fiber-optic
connections, use one duplex SC-type connector
Figure
Figure C-5
Figure C-6
Figure C-7
Simplex
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
C-6
C-6.)
Duplex SC Cable Connector
Simplex SC Cable Connector
Attaching Simplex or Duplex Fiber-Optic Cables
SONET/SDH with simplex
or duplex SC connectors
RX TX
Duplex
To network
Appendix C
(Figure C-5) or two simplex SC-type connectors. (See
Cable Specifications
OL-5916-01