Semi-Automatic Cleaning - Convotherm mini OES 6.06 User Manual

Daily servicing and maintenance
Semi-automatic cleaning of
the oven interior
The CONVOTHERM is equipped with a
semi-automatic oven cleaning programme
called "clean".
button. → Various options
1. Press the
will appear in the display. Use the
selector dial to select 'Cleaning'
confirm by pressing the
2. Confirm 'Yes' with the
The symbol will be illuminated and
the display will show the required
values for the cleaning programme.
button. → The
3. Press the
CONVOTHERM will start the cleaning
process.
4. After the first signal, spray the oven
interior, oven floor outflow, oven
shelves, trays, etc. with original
CONVOTHERM oven cleaner. Close
the door and leave to take effect. The
cleaning programme will continue
automatically. (Do not press the
button again!)
5. After the next signal, switch off the
CONVOTHERM.
6. Using the optional hand shower
thoroughly rinse the oven interior and
accessories or just wipe out thoroughly
with a non abrasive sponge or cotton
cloth.
7. In the case of severe staining or soiling,
repeat the cleaning process.
8. Do not close the appliance door after
use or after cleaning, but leave it ajar.
General safety advice
•
and
button.
button. →
•
•
•
START
STOP
•
•
•
- 52 -
When working with cleaners,
wear suitable protective
clothing, protective gloves and
protective glasses.
Do not inhale the spray mist.
Only use original CONVOTHERM
cleaning and nozzle rinsing agents
(no irritant, high-alcohol cleaners or
abrasive agents). In the event of
damage which can be traced back to
improper cleaning, any claim under
the warranty becomes invalid.
Follow the safety instructions on the
labels and on the safety data sheets
of the cleaners. Other cleaners can
cause damage to the appliance.
Ensure that the suction plate and the
shelf racks are inserted and locked
in accordance with the instructions.
Never leave spray bottles unused
and under pressure for long periods.
Turn the pump head slowly to relieve
air pressure.
Rinse nozzle, nozzle extension and
nozzle connection after each use.
Before heating up the appliance,
remove all cleaning residues
thoroughly.
EN