Troubleshooting - Monster Power Powerbar 1100 Owner's Manual

Symptom
The PowerBar is
™
not receiving power.
16

TROUBLESHOOTING

Possible Cause
The PowerBar
™
is not turned on
Too many devices are
connected, causing an
overload, throwing the
Thermal Circuit Breaker.
Please note: The total
power consumption on all
the components powered
by the PowerBar should not
exceed 1800 watts.
Remedy
• Turn the PowerBar switch on.
™
• Make sure the PowerBar's AC power plug
is plugged into a properly grounded 120V
wall outlet.
• In some households, a wall switch
may need to be thrown to make the wall
plug come alive. Try turning on the light
switches located near the wall unit powering
the PowerBar.
• Press the PowerBar Thermal Circuit Breaker
button (labeled as RESET below the power
cord) in to reset. Please allow 10 minutes
from the time the circuit breaker is thrown
before attempting to reset. If you reset
too soon, the breaker will prematurely
sense power overload and not allow
unit to operate.