Panel Mounting - RuggedCom RuggedMC RMC40 Installation Manual

2.2 Panel Mounting

With the use of an optional panel-mount adapter, the RuggeMC TM series of media converters can
be panel mounted. The drawing shown in Figure 2.2.1 shows an example of an RMC unit panel
mounted using the optional panel mount adapter.
The panel mount adapter can be secured to a panel with three screws. The RuggedMC TM product
is easily mounted onto the panel mount adapter via the two metal clips on either side of the unit,
and a single screw located on the bottom.
Figure 2.2.1: RuggedMC panel mounted using optional panel mount mounting adapter.
8
©
2006 RuggedCom Inc. All rights reserved Rev101