Dielectric Strength (Hipot) Testing - RuggedCom RuggedWireless RS900W Family Installation Manual
Hide thumbs
Also See for RuggedWireless RS900W Family:
- Specification sheet (10 pages) ,
- Upgrade manual (7 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
2.3 Dielectric Strength (HIPOT) Testing
Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the
braided ground cable disconnected during the test. This is required in order to prevent the surge
suppression circuitry, which is connected to surge ground, from being activated.
Figure 6 - Dielectric Strength Testing
10
©
2008 RuggedCom Inc. All rights reserved
Rev103
Advertisement
Table of Contents
