Charge It Up; Clip It On; Let's Go - Motorola MOTOACTV User Manual

Let's go

get up and running

Charge it up

Before using your MOTOACTV, make sure the battery is
fully charged. You can charge your MOTOACTV:
• using the wall charger (takes about an hour) provided
with your device or you can plug MOTOACTV to your
computer using a micro USB cable.
• using a USB cable and your computer (takes about
two hours)
Note: When charging your MOTOACTV using your
computer, it may take up to 20 minutes before your
MOTOACTV turns on.
The white light on your device indicates charging is in
progress.
Charging
Indicator Light
3H
Note: The MOTOACTV battery is non-removable. Any
attempt to remove or replace your battery may damage
the product.
Caution: Please read "Battery Use & Safety" on page 33.
Tip: To save battery life, see "Battery tips" on page 26.

Clip it on

1
To remove clip:
Note: The product is designed for wearable use with a
Motorola accessory when it is not being hand operated.
2
(Shown with wristband)
Let's go 3