Table of Contents
Advertisement
TM
2.9 SLI
, 3-Way SLI
Guide
This motherboard supports NVIDIA® SLI
TM
SLI
(Scalable Link Interface) technology that allows you to install up to four
identical PCI Express x16 graphics cards. Currently, NVIDIA® SLI
TM
SLI
technology supports Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
Requirements
1. You should only use identical SLI
fied.
2. Make sure that your graphics card driver supports NVIDIA® SLI
Download the drivers from the NVIDIA® website: www.nvidia.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a NVIDIA® certified PSU.
Please refer to the NVIDIA® website for details.
2.9.1 Installing Two SLI
TM
TM
, 4-Way SLI
and Quad SLI
TM
, 3-way SLI
TM
-ready graphics cards that are NVIDIA® certi-
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
Operation
TM
TM
, 4-way SLI
and Quad
TM
and Quad
TM
technology.
Z97 Extreme9
29
Hide quick links:
Advertisement
Table of Contents
