Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips MC127 User Manual

7 Listen to radio

Tune to a radio station

1
Press SOURCE repeatedly to select FM
source.
2
Press and hold
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In tuner mode, press and hold PROG for more
than 2 seconds to activate automatic program
mode.
» [AUTO] is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
/ for more than 2
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [P-] is displayed.
3
Press PRESET +/- to allocate a number to
this radio station, and then press PROG to
/
confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press PRESET +/- to select a
preset number.
Tip
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
EN
15