Assembly - NordicTrack 831.24990.0 User Manual

16. See the side view drawing. Slide the Console
Base Back (104) upward to the handrail assem-
bly (I), and insert the flange on the Console Base
Back into the handrail assembly.
Note: You will need to tip the Console Base Back
(104) so that the flange can fit into the handrail
assembly (I). Also, the speaker wires (H) need to
fit into the slots in the Console Base Back.
Tighten ten #8 x 3/4" Screws (2) into the Console
Base Back (104) in the indicated locations.
17. Carefully slide the Upright Crossbar (41)
between the Uprights (89, 90). Attach the Upright
Crossbar with the four 5/16" x 3/4" Screws (4)
that you removed in step 6 and four 5/16" Star
Washers (11). Start all four Screws, and then
tighten them.
16
Slot
2
2
104
17
4
11
90
17
H
Slot
104
2
Side View
I
Flange
41
4
11
89
2