Kingdy HP-5N Series User Manual page 17

BIOS Setup
Super IO Configuration
This section is used to configure the serial port functions.
Case Open Beep
Set this field to Enabled to allow the system to alert you
of a chassis intrusion event.
Watchdog
This field is used to enable or disable the Watchdog
Timer function.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
AC Power Loss
Turns Off
When power returns after an AC power failure, the
system's power is off. You must press the Power button
to power-on the system.
Turns On
When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system's power is off when
AC power failure occurs, it will remain off when power
returns. If the system's power is on when AC power
failure occurs, the system will power-on when power
returns
16 HP-5N Series