Kingdy HP-5N Series User Manual page 16

BIOS Setup
IDE Configuration
This section is used to configure IDE functions.
OnChip SA TA Type
This field is used to configure the SATA devices
supported by the AMD T56N/T40N.
Native IDE This option configures the Serial ATA drives
as Parallel ATA storage devices.
RAID This option allows you to create RAID on Serial
ATA devices.
AHCI This option allows the Serial A TA devices to use
AHCI (A dvanced Host Controller Interface).
Legacy IDE This option configures the Serial A TA drives
as Legacy IDE storage devices.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
USB Configuration
This section is used to configure USB.
Legacy USB Support
Enabled
Enables legacy USB.
Auto
Disables support for legacy when no USB devices are
connected.
Disabled
Keeps USB devices available only for EFI applications.
EHCI Hand-off
This is a workaround for OSes that does not support
EHCI hand-off. The EHCI ownership change should be
claimed by the EHCI driver.
Device reset time-out
Selects the USB mass storage device start unit
command timeout.
15 HP-5N Series