Configuring The Sound Settings - Ogo Handheld Device User Manual

OGO User Manual
Configuring the Sound Settings
The settings configured in the Sounds tab enable you to determine the sounds
made by your Ogo in various situations.
►
To configure your sounds settings:
In Settings, select the Sounds tab.
1
Edit one or more of the sound settings, as required. The Sounds settings are
2
described in Table 20.
Table 20: Sounds Settings
Item
Ringtones
System sounds
Alerts
Silent
Vibration
90
Description
Enables you to set the volume of the ringtone played to
indicate an incoming call.
Adjust the volume by moving the indicator on the slider
using the inner left and right arrow keys on the 8‐way
selection key. The ringtone is played after each change of
the volume level, enabling you to hear the actual volume
level being configured.
Enables you to set the volume of the sounds played to
indicate various system events.
Adjust the volume by moving the indicator on the slider
using the inner left and right arrow keys on the 8‐way
selection key. A beep is played after each change of the
volume level, enabling you to hear the actual volume
level being configured.
Enables you to set the volume of the sounds played to
indicate an alert (such as receiving a new message).
Adjust the volume by moving the indicator on the slider
using inner left and right arrow keys on the 8‐way
selection key. A beep sound is played after each change
of the volume level, enabling you to hear the actual
volume level being configured.
Silences all of the device sounds (ringtones, system
sounds and alert).
When this option is selected, the vibration alert is
enabled. The vibration alert can be activated for an
incoming call (depending on the option in Incoming Call
Alert screen), and (if the Silent option is selected) for any
event that displays a banner, when a contact comes
online, or when a new message is received.
Configuring the Sound Settings