Ogo Handheld Device User Manual page 86

Item
Call waiting
Incoming call
alert
Speed dial
Configuring the Phone Settings
Description
When enabled, Ogo notifies you of an incoming call while
a call is in progress, rather than delivering a busy signal to
the new caller.
To access the settings, select Configure and press Enter
to display the Call waiting screen. Select Enable or
Disable, and press Enter. Press Query to view the current
setting.
The ways in which you are alerted to an incoming call,
including the type of ringtone, its volume, and/or
vibration.
To access the settings, select Configure and press Enter
to display the Incoming Call Alert screen.
To set the ringtone, select Ringing tone and press enter.
Then select the desired ringtone from the list. Each
ringtone in the list will play when highlighted for a few
seconds.
To set the volume, select Ringing volume and adjust the
volume by moving the indicator on the slider using the
inner left and right arrow keys.
To enable the vibrating alert, select Vibrating alert and
press Enter. Pressing Enter when the option is already
selected clears the checkbox, and disables the vibrating
alert.
Select Done and press Enter.
You can create shortcuts for dialing your most commonly
needed numbers.
To access these settings, select Configure and press Enter
to display the Speed dial screen.
Select a number for which you want to assign the speed
dial option, and press Enter. The Contacts List appears,
enabling you to select the telephone number to be
assigned to the number you have chosen. (Repeat to
assign additional speed dial numbers.)
Select Close and press Enter.
Device and Application Settings
81