Harris DAC-5016 Installation And Operation Manual page 43

Chapter 2: ADC-5100 Series Analog Digital Clocks
buttons be held for 50 seconds. When adjustments
MANUAL SET
are complete and the second hand is on the marker, be sure to
release the button after the button in order to
CW MANUAL SET
avoid accidentally entering the Manual Set Mode.
• To move the second hand counter-clockwise, press and hold the
and buttons together in the following manner:
CCW MANUAL SET
press and hold the button first, followed by the
CCW MANUAL
button. For every second that the buttons are held, the hands
SET
will move three extra motor points backward. There are 150 motor
points per second; therefore a one second error requires that the
and buttons be held for 50 seconds. When
CCW MANUAL SET
adjustments are complete and the second hand is on the marker, be
sure to release the button after the button in
CCW MANUAL SET
order to avoid accidentally entering the Manual Set Mode.
•
5000/5100 Series Digital Analog Clocks Installation and Operation Manual 31