Table of Contents
Advertisement
– In this menu, you can enable automatic assignment of an IP address, or manually set:
GLAN
•
IP address
•
Subnet mask
•
Gateway IP address
•
DNS server IP address
You can enable and set bandwidth limitation
– In this menu, you can enable automatic assignment of an IP address, or manually set:
LAN
•
IP address
•
Subnet mask
•
Gateway IP address
•
DNS server IP address
You can enable and set bandwidth limitation limits
Protocols
This menu contains the following configuration settings:
– in this section you can set:
SIP
•
Terminal Alias
•
Terminal password
•
Use registrar
•
Server
•
Use Proxy
•
Server
•
Server type
Microsoft OCS, etc)
•
Protocol type
•
: port for server signaling (Default is 5060).
Port
– in this section you can set:
H323
•
Name H.323
gatekeeper.
•
Number H.323
gatekeeper.
Possibility to discard incoming calls by IP address, incoming calls by alias accepted only (if
registered to a gatekeeper)
•
Gatekeeper
42
;
;
;
.
;
;
;
.
: run terminal registration at a SIP Registrar Server.
: enter SIP Registrar Server IP address.
: use a Sip Proxy Server.
: enter Sip Proxy Server IP address.
: to choose server type to connect to (e.g CISCO UCM Microsoft LCS,
: use the appropriate protocol (UDP/TCP)
: (H.323 ID) the name used by the terminal for registration to the
: (E.164) identifying number used by the terminal for registration to the
use and settings parameters
Advertisement
Table of Contents
