Stealth Cam STC-DVIRHD User Manual page 23

Using the camera in PIR detection mode:

Mount the camera to tree or other sturdy object using
either a tree screw (optional accessory) or supplied
mounting strap (You may refer to the mounting
suggestions section in this manual).

Open the front housing and move the switch to the ON
position. At this point, you have 30 seconds to make any
program adjustments.

After 30 seconds the camera's green LED light will begin
blinking and enter count down mode. This is your
indication to leave the coverage area within one minute.

After one minute, the camera will enter either image
burst mode or adjustable video mode based on your
program setting. The camera will then time out between
1 ~ 59 minutes, depending on your setting.
 The time between motion detection and the camera
taking the pictures may vary due to lighting conditions,
program settings, and battery power level.
 The IR Emitter will only activate in low light conditions.
www.stealthcam.net
STC-DVIRHD
Toll Free 877-269-8490
23