Controllers - Kawai MP7 Owner's Manual

EDIT Menu parameters


Controllers

1. Damper Pedal
This parameter determines whether or not the included F-10H
damper pedal is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
3. Half Pedal Values
This parameter changes the half pedal ranges sent by the included F-10H damper pedal for the selected zone.
This parameter is useful when using the MP7 to control external tone generators (e.g. software pianos) that respond to damper pedal behaviour differently.
Half Pedal Value Value Range
Normal 0 ~ 127
(default)
High 0, 64 ~ 127
Low 0 ~ 63, 127
4. Modulation Depth Range
This parameter sets the range of the pitch modulation function
in steps of 600/127 cents.
5. Pitch Bend
This parameter determines whether or not the pitch bend
wheel is active for the selected zone.
7. Modulation Wheel
This parameter determines whether or not the modulation
wheel is active for the selected zone.
9. Right Pedal
This parameter determines whether or not the right pedal of
the optional F-30 pedal unit is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
11. Center Pedal
This parameter determines whether or not the centre pedal of
the optional F-30 pedal unit is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
0
(EXT mode)
o , o
n ff
Description
The damper pedal sends a full range of evenly distributed values.
The damper pedal sends a full range of evenly distributed values after the half-pedal point is reached.
The damper pedal sends a full range of evenly distributed values before the half-pedal point is reached.
: 0 ~ 127
value
o , o
n ff
o , o
n ff
o , o
n ff
o , o
n ff
2. Damper Pedal Assign
This parameter selects the function assigned to the included
F-10H damper pedal.
* This parameter is common for all four zones.
6. Pitch Bend Range
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range differs for INT mode (0 ~7) and EXT mode (0~12).
8. Modulation Wheel Assign
This parameter selects the function assigned to the MP7's
modulation wheel.
10. Right Pedal Assign
This parameter selects the function assigned to the right pedal
of the optional F-30 pedal unit.
* This parameter is common for all four zones.
12. Center Pedal Assign
This parameter selects the function assigned to the centre
pedal of the optional F-30 pedal unit.
* This parameter is common for all four zones.
cc#0 ~ cc#119, a
ftertoucH
n , H , l
ormal igH ow
: 0 ~ 12
value
cc#0 ~ cc#119,
a
ftertoucH
cc#0 ~ cc#119,
a
ftertoucH
cc#0 ~ cc#119,
a
ftertoucH