Robot Coupe R4X Operation Manual page 3

I. INTRODUCTION
II. ASSEMBLY/DISASSEMBLY
INSTRUCTIONS
III. OPERATING INSTRUCTIONS
IV. PREVENTIVE MAINTENANCE
GUIDE
V. TROUBLE SHOOTING AIDS
VI. SERVICE AGENCY LISTING
INTRODUCTION
The Robot Coupe commercial food processor performs
a host of culinary feats. It is designed for high speed
and quality vegetable processing. The models R4X
and R6X will slice, julienne, shred, grate and also cut
French fries and dice many products with the continu-
ous feed attachment.
This operators manual is broken down into sections
giving you detailed instructions for assembly and op-
eration of the continuous feed attachment and the cut-
ter bowl attachment. Close attention should be paid to
all instructions in this manual to ensure a long life utili-
zation of your food processor.
This manual should be kept within easy
access to all users for reference, and
should be read completely by all first time
users of the machine.
Maintaining the food processor in good working condi-
tion is one of the most important measures to be taken.
Inspect the machine and all parts regularly to make
sure they are in good working condition.
DO NOT operate a machine that has mal-
functioned in any way.
Discard any food processed at the time of
a malfunction
and have the machine inspected and
repaired at one of the Robot Coupe Authorized Ser-
vice Agencies, a list is provided in the back of this
manual. Contact one of these service agencies for all
of your service, parts, and accessory requirements.
CAUTION: Your Robot Coupe comes with
sharp cutting plates. Always handle with
safety in mind. We suggest that a pair of
cut-resistant gloves be worn when han-
dling the cutting plates.
Machine Specifications:
The Models R4X and R6X are equipped with a high
speed motor generating 1 Hp which plugs into a stan-
dard 120 volt/ 60 Hz, 15 amp power outlet. The full
load amperage rating for the R4X is 7.5 amps, and the
amperage rating for the R6X is 7.6 amps. The stan-
dard machines are supplied with a continuous feed at-
tachment, and two cutting plates. The machines are
equipped with push type on and off buttons. The R6X
has a metal feed lead with a hinged pusher and the
R4X has a plastic feed lead.
R4X and R6X Operation Manual
3