Samsung 4 series User Manual page 23

7. Accessing and Using the Main Menu
•
Your TV's Main menu contains functions that let you control many of the TV's features. For example, in the Main menu
you can change the size and configuration of the picture, its brightness, its contrast and so on. There are also functions
that let you control the TV's sound, channel configuration, energy use, and a host of other features. To access the main,
on-screen menu, press the MENU (liD) button on your remote.
To use the Main menu, press the A./T buttons to move between the main option categories: Picture, Sound, Channel,
etc. Each time you press a A./T button, the main category name on the left side of the menu changes.
To select a menu option in one of the categories, press the ..,. button or the
ENTER
G
button. Press it again or press
ENTER
G
to see the values or choices associated with that option. Usually, you would then press
ENTER
G
to select
a value or choice. Press the RETURN button or the .,... button to return to a previous screen or selection .
8. Using the rv•s Controller (Panel Key)
•
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the
remote control.
Function menu
UN22EH4003
UN32EH4003
I
UN39EH5003
Remote control sensor
TV Controller
TV Controller
Power on
Adjusting the
volume
Selecting a
channel
Using the
Function menu
Selecting
Media Play
Selecting the
MENU (liD)
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjust the volume by moving the Controller from side to side when the power is on.
Select a channel by moving the Controller backwards and forwards when the power is on.
To view and use the Function menu, press and release the Controller when the power is on. To
close the Function menu, press and release the Controller again.
With the Function menu visible, select
Media Play by moving the Controller backwards.
The Media Play main screen appears. Select a media source by moving the Controller
back and forth, and then pressing the Controller.
With the Function menu visible, select the
Menu (liD) by moving the Controller to the left. The
OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right.
Move the Controller to the right or left, or backwards and forwards to make additional selections.
To change a parameter, select it, and then press the Controller.
-7-