Brother P-touch PT-P750W User Manual page 55

Appendix
Problem
The ink ribbon is separated
from the ink roller.
The P-touch labeler stops
while printing a label.
The label is not cut
automatically.
I want to confirm whether I am
using the latest version of the
software.
If the ink ribbon is broken, replace the tape cassette. If not, leave the tape uncut and
remove the tape cassette, then wind the loose ink ribbon onto the spool as shown in
the figure.
1 Spool
 Replace the tape cassette if striped tape is visible, as this indicates that you have
reached the end of the tape.
 Replace all batteries or connect the AC adapter directly to the P-touch labeler.
 The print head may be too hot. Wait for a while, and then try printing again.
Check the option setting in the printer driver. For more information about the cutting
options, see the FAQs on the Brother Solutions Center.
Alternatively, press the Feed & Cut button to feed and cut the tape.
Use the P-touch Update Software provided to confirm whether you are using the
latest version of the software.
For more information about the P-touch Update Software, see the FAQs on the
Brother Solutions Center.
Solution
1
A
50