Integrated Peripherals - MSI MS-7353 User Manual

M S-7353 M ainboard

Integrated Peripherals

USB Controller
This setting allows you to enable/disable the onboard USB controller.
USB Device Legacy Support
Select [Enabled] if you need to use a USB-interfaced device in the operating system.
Onboard LAN Controller
This item is used to enable/disable the onboard 1st LAN controller (Realtek 8111B, the
one next to the USB connector).
LAN Option ROM
This item is used to decide whether to invoke the Boot ROM of the LAN controller.
Onboard IEEE1394 Controller
This item allows you to enable/disable the onboard IEEE1394 controller.
RAID M ode
This item is used to select RAID mode for the hardware silicon image RAID controller.
Default option is "RAID1 Mode".Settings are:
[RAID1] The RAID1 mode enables SATA7 & SATA8 mirroring automatic
[RAID0] The RAID0 mode enables SATA7 & SATA8 striping automatic
[JBOD] The JBOD (Just Bunch of Disks) enables SATA7 / SATA8 to be seen
separately as one drive.
3-12