Trusted Computing - MSI MS-7353 User Manual

Active State Power-M anagement
This item is used to enable/ disable ASPM (Active State Power-Management).
ASPM allows power to be incrementally reduced to individual serial links in a PCI
Express fabric as a link becomes less active. The configuration of the PCI
Express implementation on a system affects the amount of power savings that
can actually be achieved. If you are using PCIE generation 1 graphics card,
please set it to "Disabled". Set it to "Enabled" to allow the PCIE generation 2
garphics card running at PCIE generation 2 8.0 GB/s speed.
Boot Sequence
Press <Enter> to enter the sub-menu and the following screen appears:
1st/ 2nd/ 3rd Boot Device
The items allow you to set the first/ second/ third boot device where BIOS
attempts to load the disk operating system.

Trusted Computing

Press <Enter> to enter the sub-menu and the following screen appears:
TCG/TPM SUPPORT
This field is used to enable or disable TPM (Trusted Platform Module).
Execute TPM Command
This field is used to enable(activate)/disable(deactivate) Command to TPM.
TPM Enable/Disable status, TPM Owner Status
These items show the status of TPM (read only).
BIOS Setup
3-11