Table of Contents
Advertisement
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
Monthly service by owner
or trained technician
Semiannual service by trained
technician only
(or every 50 hours of operation,
whichever comes first)
Annual service by
trained technician only
(or every 100 hours of operation,
whichever comes first)
Two year service by
trained technician only
(or every 200 hours of operation,
whichever comes first)
ý
WARNING
• If any problems are found during scheduled inspection or service, do not operate vehicle until
repairs are made. Failure to make necessary repairs could result in fire, property damage,
severe personal injury, or death.
SERVICE
Engine
Tires
General vehicle
Battery
Front wheel alignment and toe-in
Electrical wiring and connections
Brake system
Engine
Engine air intake system
General vehicle
Fuel filters
2007 HUV4213 Gasoline Vehicle Owner's Manual
Periodic Service Schedule
Check engine oil level; change if
necessary. See Periodic Lubrication
Schedule on page 28.
Check engine cooling air intake; visually
inspect unshrouded area around engine
exhaust for grass and debris and clean if
necessary.
Check air pressure and adjust if
necessary. See Vehicle Specifications
on page 38.
Wash engine compartment and underside
of vehicle. Do not wash engine when hot.
Clean terminals and wash dirt from
casing; check electrolyte level. Add
distilled water if necessary. See page 35.
Check and adjust if necessary. See
Section 7 – Steering and Front
Suspension in the appropriate
maintenance and service manual.
Check for tightness and damage.
Inspect master cylinder, wheel cylinders,
brake lines, and hoses for damage or
leakage.
Check park brake cables for damage;
replace if necessary.
Check brake shoes and drums; replace if
necessary. See Section 6 – Park Brake
System and Wheel Brake Assemblies
in the appropriate maintenance and
service manual.
Check for leaks around gaskets, fill plugs,
etc.
Inspect, clean and gap spark plug; replace
if necessary.
Check air filter element; clean or replace if
necessary.
Check clamps for tightness; check hose
for cracks.
Check for loose hardware and tighten if
necessary.
Replace. Dispose of used filters properly.
See Engine Oil and Filter Change on
page 30.
Page 27
Advertisement
Table of Contents
