Jenn-Air SCE4320 Use And Care Manual page 32

Solid element and radiant ranges with convection
Table of Contents

Advertisement

7.
The cleaning process begins immediately unless the self-cleaning process has
been set for a delayed start. When the oven temperature reaches 550°F, the LOCK
INDICATOR LIGHT will glow and the door cannot be opened until the temperature
drops below 550°F. DO NOT TRY TO UNLOCK THE DOOR WHILE LOCK
INDICATOR LIGHT IS ON. The normal cleaning process takes the time selected
on the clock plus about 45 minutes for the oven to cool down before the LOCK
INDICATOR LIGHT goes out and the door can be opened.
8.
At the end of time set, oven will stop automatically and not beep.
9.
After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER to
the left. The oven door can now be opened.
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after the
door is unlocked.
IMPORTANT: IFTHETEMPERATURE KNOB ISTURNEDTO OFF BEFORETHE
DOOR IS UNLOCKED, THEDOOR WILLNOTOPEN. Forcing the lock will damage
the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the door,
then turn TEMPERATURE knob OFF.
NOTE: A fan comes on whenever the SELECTOR knob is set on CLEAN; therefore,
the fan will continue to operate at the end of the cleaning process until the
SELECTOR knob is turned OFF. The fan will also start as soon as the controls are
set for a delayed start of the self-cleaning process.
To check
START
TIME
before
cleaning
begins:
Hold in START TIME
button until the words START TIME appear in the Display Window. The start time will
be displayed briefly, then Display will return to time of day.
To change
START
TIME
before
cleaning
begins:
1.
Hold in START TIME button until the words START TIME appear in the Display
Window.
2.
Turn SET dial to time desired.
3.
Push ENTER button to enter new start time.
The indicator words STOP TIME and a new stop time will appear in Display Window.
The new stop time will be 2 1/2 hours later than the new start time.
For a heavily soiled oven, the stop time will need to be changed by turning the SET
dial.
4.
Push ENTER button to enter new stop time.
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce4340

Table of Contents