Cable Your Router - NETGEAR JNR1010v2 User Manual

Cable Your Router

The installation guide that came in the box has more details about installation.The following
illustration shows typical cable connections for a router.
Internet
Your router might look different than
the router shown in this diagram.
Figure 1. Router cable connections

To cable your router:
1. Prepare your modem.
Unplug your modem's power. If it has a battery backup, remove the battery.
2. Connect the modem.
Plug in your modem. Put the battery back in. Then cable the modem to the router's
Internet port
3. Connect the power adapter cord that came in the package to the power input on the rear
panel of the router and plug it in to an electrical outlet.
The Power LED
4. Connect a computer or wireless device.
You have two options:
• Connect with WiFi. To connect with WiFi, use the WiFi network name and password
on the product label.
• Connect with an Ethernet cable. Use an Ethernet cable to connect a computer to
one of the Ethernet LAN ports on the rear panel of the router.
N150 and N300 Wireless Routers
Ethernet cable
Modem
Router
lights.
Hardware Setup
9
Ethernet cable
(included with some models)