Jabra BT2050 Quick Start Manual

PLEASE NOTICE: Before using your new Jabra headset, you must fully
charge it and set it up by "pairing it" with your selected Bluetooth device.
Charge your headset
While charging the headset, the LED light flashes and after the headset is
charged, the LED light lit constantly.
2 hrs
turning your headset on and off
Press on/off button for appr. 2 secs to turn the headset on or off.
pairing the headset with your phone
1. First time pairing: Later pairing:
Turn headset on - automatic Turn headset off. Press and hold
pairing mode when LED is lit until solid light comes on.
constantly.
2. Activate Bluetooth on phone.
3. Search for Bluetooth devices and select Jabra BT2050.
4. Press 'OK' on the phone and confirm with PIN code 0000 (4 zeros).
JABRA BT2050
BT2050
JABRA BT2050
how to
Answer a call Activate voice dialing*
• Tap the answer/end button. • Press the answer/end button.
End a call For best result, record the voice-
• Tap the answer/end button. dialling tag through your headset.
Make a call Redial last number*
• The call will automatically • Double tap the answer/end
transfer to your headset*. If not button when the headset is on
tap the answer/end button. and not used.
Reject a call Adjust sound and volume*
• Press the answer/end button . • Tap the volume up or down.
Volume up/
Answer/end
volume down
button
*Device dependent
wearing style
Wear the Jabra BT2050 with or without an earhook. To wear earhook,
please click on for right or left ear wearing.