Hotpoint LI2SNA Instructions For Installation And Use Manual
Hotpoint LI2SNA Instructions For Installation And Use Manual

Hotpoint LI2SNA Instructions For Installation And Use Manual

Electric hood

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LI2SNA and is the answer not in the manual?

Questions and answers

Summary of Contents for Hotpoint LI2SNA

  • Page 2 Retention of this Instruction Book Merloni Elettrodomestici UK Ltd., Morley Way , Peterborough, PE2 9JB...
  • Page 3: Installation

    Installation ! It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product. ! Read the instructions carefully: there is important information about installation, use and safety. ! Do not carry out electrical or mechanical variations on the product or on the discharge conduits.
  • Page 4 – operation 1) and mark 2 holes with a pencil, drill the holes (Ø8mm), insert 2 wall plugs. 12. Fix the chimney support bracket to the wall using two 5x45mm screws. 13. Hook the hood onto the bottom bracket. 14. Fix the hood into its final position on the wall (ABSOLUTELY ESSENTIAL).
  • Page 5: Description Of The Appliance

    Control panel Calibrating the control panel When the plug is inserted (or after a blackout) the system calibrates the keys; during calibration the display point flashes. Calibration lasts 15”. The point stops flashing at the end of calibration. Off/Stand by: the On condition is obtained by pressing for 3 seconds;...
  • Page 6: Operation

    Operation ! We advise switching the hood on, at minimum power, before beginning to cook to favour the optimal expulsion of odours. In addition we advise turning it off every time 10/15 minutes after finishing cooking. ! We advise frying under the hood only under constant supervision.
  • Page 7: Maintenance

    ! It is always necessary to isolate the hood from the power supply during cleaning and maintenance. Therefore remove the plug. We recommend carrying our maintenance regularly (about every 10 days) to ensure efficacious and constant performance of the hood. Cleaning the hood The hood should be cleaned frequently, both internally and externally.
  • Page 8: General Safety

    General safety ! The hood has been designed and constructed in conformity with international safety regulations. These warnings are provided for safety reasons and must be carefully read. This apparatus has been designed for use by adults. Children and invalids are not allowed to use this apparatus without supervision.
  • Page 11: After Sales Service

    Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer.
  • Page 12 Indesit Company, Morley Way , Peterborough, PE2 9JB LI2SNA Ed. 01/06...

Table of Contents