Other Functions - Hotpoint RLB20 User Instructions

Other functions

Fridge compartment chiller tray cold air
control (model no. RSB20)
The slide at the rear of the chiller tray controls
the amount of cold air that flows into the
fridge compartment. The chiller tray must be
pulled out of the fridge in order to adjust the
slide.
Fridge compartment too warm:
Open the slide at the rear of the chiller tray
(indicator pointer visible). If the fridge
compartment is still to warm, turn the
thermostat control to a colder setting (higher
number).
Fridge compartment too cold:
Close the slide at the rear of the chiller tray
(indicator pointer covered). If the fridge
compartment is still to cold, turn the
thermostat control to a warmer setting
(lower number).
A CLOSED
B OPEN
Warmer fridge setting:
Indicator pointer covered A = closed.
Colder fridge setting:
Indicator pointer visible B = open.
10
Care & Cleaning
* Disconnect the appliance from the
power supply.
* Do not pour water over the appliance.
* The internal compartments should be
cleaned periodically using a solution of
bicarbonate of soda and warm water.
* Clean the accessories separately with
soapy water. Do not put in a dishwasher.
* Do not use abrasive products, detergents
or soaps. After washing, rinse with clean
water and dry carefully. When the cleaning
operations have finished, reconnect the
plug with dry hands.
* You should clean the condenser at least
twice a year in order to save energy and
increase productivity.
Replacing the light bulb
When replacing a bulb;
1. unplug the appliance from the power
supply.
2. Press the hooks on the sides of the light
cover top and remove the light cover.
3. Replace the bulb with a new one of not
more than 15W.
4. Replace the light cover and after waiting 5
minutes restart the appliance.