Hotpoint Larger Fridge RLM54 Instructions For Installation And Use Manual page 4

Levelling:
Level the fridge when it is in its final location by adjusting the front feet, until firm
contact is made with the floor. This will stop rocking or vibration and keep the door
aligned which helps the fridge run reliably and efficiently.
Note: Before plugging in and switching on, leave the fridge standing
in its final location for at least 15 minutes to allow it to settle.
Bottle Retainer:
To fit the bottle rack retainer:
Locate the retainer groove at one end of
the bottle rack and then gradually press
down along the top edge until the
retainer is fully in the home position.
Joining:
Equal height Hotpoint fridges and freezers can be joined together to look like one
unit by using a Filler Kit available from Hotpoint Genuine Parts & Accessories Mail
Order Hotline (see KEY CONTACTS, back page).
4
Installation