Hotpoint HM312NI Instructions For Installation And Use Manual page 11

Hotpoint refrigerator/freezer instructions: model hm312ni
Table of Contents

Advertisement

If the appliance does not work, before calling for Assistance ( see Assistance ), check for a solution from the following list.
• The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position
• The refrigerator or the freezer have been over-filled.
• The TEMPERATURE ADJUSTMENT knob is not in the correct
position.
• The food is in contact with the back inside wall of the refrigerator.
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The thickness of the frost exceeds 2-3 mm ( see Maintenance ).
• The appliance has not been installed on a level surface ( see
Installation ) .
• The appliance has been installed between cabinets that vibrate and
make noise.
• The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
• The water discharge hole is blocked ( see Maintenance ).

Advertisement

Table of Contents
loading

Table of Contents