Please check
www.sitecom.com
PCR
SCR
MBS
Apply Changes
Set new PVC OoS mode for the selected PVC. New parameters will take effect after save
into flash memory and reboot the system.
Undo
Discard your settings.
for up to date drivers & utilities, manuals and support
nrt-VBR (non-real-time Variable Bit Rate): When nrt-VBR
−
is selected, the SCR and MBS fields are enabled.
rt-VBR (real-time Variable Bit Rate): When rt-VBR is
−
selected, the SCR and MBS fields are enabled.
Peak Cell Rate, measured in cells/sec., is the cell rate which the source
may never exceed.
Sustained Cell Rate, measured in cells/sec., is the average cell rate over
the duration of the connection.
Maximum Burst Size, a traffic parameter that specifies the maximum
number of cells that can be transmitted at the peak cell rate.
51
Need help?
Do you have a question about the DC-227 and is the answer not in the manual?