Warning, 2 Installation, 3-4 Positioning and levelling Electrical connection Table of characteristics Description of the appliance, 5-6 Overall view Control panel I6I6C6A/UK I6I6C6A/UK I6I6C6A/UK Display Hob control panel Start-up and use (oven), 7-10 Setting the clock Setting the timer Using the oven...
WARNINGS WARNINGS Do not use harsh abrasive cleaners Do not use harsh abrasive cleaners WARNING: The appliance and its WARNING: The appliance and its or sharp metal scrapers to clean or sharp metal scrapers to clean accessible parts become hot during accessible parts become hot during the oven door glass since they can the oven door glass since they can...
Installation The legs* fit into the slots on ! Please keep this instruction booklet in a safe place the underside of the base of for future reference.. Make sure the booklet remains the cooker. with the appliance if it is sold, given away or moved. ! Please read this manual carefully: it contains important information on installation, operation and safety.
! The manufacturer declines any liability should 400V 2N~ these safety measures not be observed. H05RR-F 4x4 CEI-UNEL 35363 ! In order Safety Chain H05VV-F 4x4 CEI-UNEL 357 46 to prevent accidental L2 L1 tipping of the appliance, for example by a child clim- bing onto the oven door, the...
Description of the appliance Overall view Glass ceramic GUIDE RAILS Control panel for the sliding racks position 5 RACK shelf position 4 position 3 DRIPPING PAN shelf position 2 position 1 Adjustable foot Adjustable foot Control panel THERMOSTAT ELECTRONIC indicator light TIMER THERMOSTAT PROGRAMMER...
Hob control panel TIMER* indicator light INCREASE PROGRAMME TIMER* POWER button display COOKING ZONE PROGRAMMED* BOOSTER* indicator light button POWER and COOKING ZONE ON/OFF BOOSTER* RESIDUAL HEAT indicator light SELECTED indicator light button indicators ON/OFF o o ste r o o ste r o o ste r o o ste r indicator light...
Start-up and use Cooking modes ! The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the ! A temperature value can be set for all cooking room is well ventilated before switching the oven off modes between 60°C and Max, except for and opening the oven door.
Lower compartment BAKING mode ! Do not place flammable materials in the lower oven The rear heating element and the fan come on, compartment. guaranteeing the distribution of heat delicately and ! The internal surfaces of the compartment (where uniformly throughout the oven. This mode is ideal for present) may become hot.
Next the desired cooking end time must be set: Planning cooking with the electronic programmer* 4. Press the END COOKING TIME button 5. Within 4 seconds of having pressed this button, Setting the clock After the appliance has been connected to the adjust the cooking end time by pressing the + and - power supply, or after a blackout, the display will buttons.
Start-up and use - - - - - The glue applied on the gaskets leaves traces of • Press the button: the power of the cooking zone grease on the glass. Before using the appliance, we will progressively decrease until it is switched off. recommend you remove these with a special non- abrasive cleaning product.
simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and 3. Confirm by pressing the button. CONTROLS LOCKED indicator lights will flash for + + + + + - - - - - To cancel a programme, follow the above one second.
Safety devices Maimum operating Power level time in hours Pan sensor Each cooking zone is equipped with a pan sensor device. The hotplate only emits heat when a pan with suitable measurements for the cooking zone is placed on it. If the indicator light is flashing, it may indicate: •...
The induction system is the quickest existing way of cooking. Unlike traditional hotplates where the cooking zone heats up, with the induction system heat is generated directly inside pans which have ferromagnetic bases. Hobs I6I6C6A/UK Cooking zone Power (W) I 1400 Back Left I 2200 – B 3000* Back Right I 2200 –...
Precautions and tips ! This appliance has been designed and • Always make sure the knobs are in the o position manufactured in compliance with international when the appliance is not in use. safety standards. The following warnings are • When unplugging the appliance, always pull the provided for safety reasons and must be read plug from the mains socket;...
Respecting and conserving the • Do not let children play with the appliance. environment • If the cooker is installed on a pedestal, take all necessary precautions to ensure that the appliance does not slide off this pedestal. • You can help to reduce the peak load of the electricity supply network companies by using the •...
Care and maintenance Switching the appliance off 1. Remove the glass cover using a screwdriver. 2. Unscrew the light bulb and replace it with a Disconnect your appliance from the electricity supply similar one: Wattage 15 W, cap E 14. before carrying out any work on it.
Catalitic Cleaning* In some models, the most exposed internal vertical sides of the oven are coated with porous enamel, which is called catalytic enamel. When heated, this enamel destroys fat particles given off by the food. This "oxidation" of the fat particles occurs when the temperature of the sides exceeds 170°C.
Assistance 03/2013- 195109393.00 XEROX FABRIANO Warning: The appliance is fitted with an automatic diagnostic system which detects any malfunctions. Malfunctions are displayed by messages of the following type: “F” followed by numbers. Call for technical assistance in the event of a malfunction.