Setting Up The Monitor; Unpacking The Monitor; Installing The Monitor - HP Q1910 User Manual

3

Setting Up the Monitor

Unpacking The Monitor

1. Unpack the monitor. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Determine whether the monitor will be desktop mounted or wall-mounted. See "Installing the
Monitor" in this chapter.
4. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing
the monitor screen-down while preparing it for installation.
5. You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a
straight-slot screwdriver to secure some cables.

Installing The Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-
ventilated location near your computer. Connect the monitor cables after you have installed the monitor.
NOTE: For displays with glossy bezels, the user should consider the placement of the display as the
bezel may cause disturbing reflections from surrounding light and bright surfaces.
Preparing the monitor for desktop use
1. Set the monitor screen face down on a flat, soft, protected table or desk surface with the support
column overhanging the edge.
CAUTION:
so can cause damage.
6 Chapter 3 Setting Up the Monitor
The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing
ENWW