Download Print this page

Honeywell HS-2007 Series Owner's Manual page 2

20" (50cm) turbo force 20" (50cm) tri-techmc high performance stand fans

Advertisement

Available languages

Available languages

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic safety
precautions should
always be followed,
including the following:
1. Use this fan only as
described in this manual.
Other use not
recommended may
cause fire, electric shock
or injury to persons.
2. This product is
intended for household
use ONLY and not for
commercial, industrial or
outdoor use.
3. To protect against
electric shock, do not
place fan in window,
immerse unit, plug or
cord in water or spray
with liquids.
4. This fan requires a
grounded 120 volt power
source (3 prong
receptacles). Never
connect this fan to any
power source other than
a properly grounded 120
volt AC receptacle. Do
not attempt to defeat this
safety feature.
INSTRUCTIONS F0R USE AND CARE
5. Close supervision is
necessary when any
appliance is used by or
near children.
6. Turn the fan to the OFF
position and unplug the
fan from the outlet when
not in use, when moving
the fan from one location
to another and before
cleaning.
7. To disconnect the fan,
first turn control to the
OFF position, grip the
plug and pull it from the
wall outlet. Never pull by
the cord.
8. Do not operate the fan
in the presence of
explosive and/or
flammable fumes.
9. Do not place the fan or
any parts near an open
flame, cooking or other
heating appliance.
10. Do not operate the
fan with a damaged cord
or plug or if the product
malfunctions, is dropped
or damaged in any
manner (see warranty).
11. Avoid contact with
moving fan parts.
12. The use of
attachments not
recommended by the
manufacturer may be
hazardous.
13. Place the fan on a dry
level surface.
14. Do not hang or mount
fan on a wall or ceiling.
15. Do not operate if the
fan housing is removed
or damaged.
16. A loose fit between
the AC outlet
(receptacle) and plug
may cause overheating
and a distortion of the
plug. Contact a qualified
electrician to replace
loose or worn outlet.
WARNING: To Reduce
The Risk of Fire or
Electric Shock, Do Not
Use This Fan With Any
Solid-State Speed
Control Device.

Advertisement

loading