Turn Signal And Headlights - Honda RSX 2005 Owner's Manual

Main Menu Table of Contents

Turn Signal and Headlights

Turn Signal
1.
2. Off
Parking and interior lights
3.
4. Headlight on
High beams
5.
6. Flash high beams
Turn Signal Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Headlights On Turning the
switch to the '' '' position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder beeper
when you open the driver's door.
To turn on the high
High Beams
beams, push the left lever forward
until it clicks. The blue high beam
indicator will come on (see page
Pull it back to return to low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Turn Signal and Headlights
Daytime Running Lights
Canadian model only
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
''
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
54 ).
61