Advertisement
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
T
complete the owner's record below:
Model______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lit.
3.
Store idle equipment. When not in use, products must be stored in a dry location to inhibit
damage from moisture and salt air.
4. Check for damaged parts. Before using any product, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check
for any broken or damaged parts and any other conditions that may affect its operation. Replace
or repair damaged or worn parts immediately.
5.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
6.
Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
7.
Keep children away. Children must never be allowed in the work area. Do not let them handle
the Laser Level.
8.
Do not direct the laser beam into the eyes of any person or animal, this may cause severe
injury to the eye. Do not look directly into the beam during operation.
9.
Laser light when reflected off of a mirrorlike surface can cause serious eye damage.
10. Use only Batteries of the type recommended-size "AAA".
11. Do not mix old and new batteries. Do not use different types of batteries; do not use
rechargeable with alkaline batteries.
SKU 90980
Serial No._____________
Technical Specifications
Construction:
Level Dimensions:
Diode Wave Length:
FDA Approved:
Batteries:
Tripod:
Laser Accuracy:
Features:
Safety Warnings and Precautions
Read all instructions before using this product!
REV 03/04
Purchase Date_______________
Machined aluminum housing with 3 vials; horizontal,
vertical and bulls-eye.
15-5/8" L x 13/16" W x 2" H
650 +/- 10 N.M.
Class III-A, Certification #0310974-00
(2) "AAA" included
41" folding
+/- .05% approximately
Projects up to 1,500 ft. (Laser dot is visible up to 1500 Ft.*)
*Dependent on illumination of work area.
REV 02/05
Page 2
Advertisement
