Haier AFD630IX Instructions For Use Manual page 15

Function
Fridge temperature setup
Press key A2 until icon D flashes. Then, press key A3 or A4 to set the temperature. The refrigerat-
ing temperature cycles from 2 to 8. After you have set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon D is accompanied by flashing of icon E
Freezer temperature setup
Press key A2 until icon H flashes. Then, press key A3 or A4 to set the temperature. The freezer
temperature cycles from -16 to -24. After you've set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon H is accompanied by flashing of icon F
Super cooling
Press key A2 until icon B flashes. Then, press key A5 to confirm the super cooling function. Icon
B will illuminate. You can deactivate the super cooling function with the same operation. When
the temperature in the refrigerator compartment is too low, the super-cooling function may not
work.That is, when you press the "super-cooling" button once, the buzzer will beep once and the
indicator will not blink, meaning the temperature in the refrigerator compartment is already low
and the super-cooling function doesn't need to be activated.
Holiday function
Press key A2 until icon C flashes. Then, press key A5 to confirm the holiday function. Icon C will
illuminate solid. You can deactivate the holiday function with the same operation.
In Holiday mode the refrigerator will operate at a relatively high temperature saving energy and
at the same time, avoiding the development of mould and bad odor.(Please remove the peri-
shable food in the refrigerator and close the the door before activiating this function). Press A2
again, and the corresponding indicator goes off and the refirgerator reverts to normal operation.
Super freezing
If you are freezing large quantities of food in the freezer compartment, switch on super freeze
function 24 hours before the food is placed in the freezer compartment. Press key A2 until icon
I flashes. Press key A5 to confirm the the super freezing function. Icon I will illuminate solid.You
can deactive the super freezing function with the same operation. The function will become
inactive automatically after 56 hours.
Ice making function (only on models with an icemaker)
Press key A2 until icon J flashes. Press key A5 to confirm the ice making function. Icon J will
illuminate solid. You can deactivate the ice making function with the same operation.
Note: If the ice machine is not installed, the H icon on the display panel will be displayed as "Er".
Icemaker's water flow time adjustment (only on models with an icemaker)
Press key A2 until icon K flashes. Press key A5 to confirm the icemaker's water flow time
adjustment. Icon K will illuminate solid. The water flow time will be indicated with icon H and icon
D. For example, if the time is 4.0s, icon H will be 4 and D will be 0. Press key A3 or A4 to set the
time in an increment of 0.5s. It cycles from 2s to 7s. After you have set it to the desired value,
press key A5 to confirm. Icon K will go off. You can exit the icemaker's water flow time adjustment
with the same operation.
Note: this operation can be performed only when the ice making function is selected.
13